Home Products Collets MITR Collets

Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 56

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198
MITR Collets Print E-mail
Direct Collet

3 to 25mm (1mm step)
1/8" to 1" (1/16" step)
upto 17 mm through Bore
Specify : Bore size of collet
alt


Milling Collet Adaptor

Specify : Max. Cap. & Type of collet to be used.
alt


Reduction Milling Sockets

Available with Inside
Bore of MT-1, MT-2 & MT-3
Specify : Morse Taper required
alt


Stub Milling Arbors

For Cutters having Bore Dia. 13, 16, 22,27, 32mm, 3/4", 1' & 1.1/4"
Specify : Bore of the cutter
alt


Side Lock Holders

Available for straight Shank Tool upto 25mm Dia.
Specify : Shank Dia of the Tool
alt


Drill Chuck Adaptors

Available for different mounting
Specify : Mounting Taper of Drill Chuck
alt


Draw Bolt

Draw Bolt for MITR with M12 x 1.5 Pitch Thread
Specify : M12x1.5 Pitch or 7/16" UNF
alt
 
Mersin Temizlik Sirketleri