Home

Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 56

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198
ER TAPPER ( For CNC Lathe) Print E-mail

STRAIFHT SHANK
UPT-05200

26-11.jpg (16563 bytes)

68-21.jpg (17682 bytes)

68-31.jpg (11035 bytes)

Set Included Body, Nut, Wrench,
Set of collet and Box.
S = V/P
S = Spindle running speed for example:
1.Processing material:S45C, V=400~440
2.Pitch = 1.5 P
3.S = V/P = 440/1.5 = 293 ( R.P.M.)


  • For use in ER Collet to hold taps , the range of hold is 1 mm , it can be hole taps in any kind of shank.
  • The body was made of SCM-21 steel , tighting screw have been prcise ground.
  • Design of telescopic ability , can be weed out overdo at the same time with main spindle turn in reverse and table fall back , protect workpiece and tap against break.
  • Ductile shank was short , so did not commandeer space.
  • Floating assembly , can be automatic to correct deviation of repeated position in workpiece.

ER32 Tapping Collet see UPT-05320

68-31.jpg (11035 bytes)

UPT-05205-1 Body
UPT-05205-2 Key ring
UPT-05205-3 Fix key
UPT-05205-4 Conjunction spindle
UPT-05205-5 Steel ball cover
UPT-05205-6 Big spring
UPT-05205-7 Steel ball (4pcs)
UPT-05205-8 Little spring (4pcs)
UPT-05205-9 ER tapper chuck
UPT-05205-10 Side lock screw
UPT-05205-11 ER nut
UPT-05205-12 ER tap collet

NOTE:
1.
The processing material is more hard , the M/min should also become more slow.
2.
Before use the Straight Shank ER Tapper, please decide spindle running speed of Lathe
machine, otherwise will make the Shank and Tapping break or split cause to too fast or
too slow of speed.

MODEL NO
TYPE
D
d1
d2
L
l1
l2
l3
COLLET
CapACITY
WEIGHT
(KGS)
UPT-05205 TP-20 44 20 34 159 172 79 80 ER20 M3-M16 0.5
UPT-05215 TP-32 56 32 50 174.5 190 94.5 80 ER32 M3-M27 1.6
UPT-05225 TPM-320 44 MT3 34 165 178 79 86 ER20 M3-M16 1.4
UPT-05235 TPM-420 44 MT4 34 165 178 79 86 ER20 M3-M16 1.6
UPT-05245 TPM-432 56 MT4 50 203.5 216.5 94.5 109 ER32 M3-M27 1.8

MODEL NO
TYPE
COLLET
TapPER
WEIGHT
(KGS)
UPT-05210 TP-20x7PCS/SET 4,5,6,7,9,12,13mm M3~M16 1.22
UPT-05220 TP-32x10PCS/SET 4,5,6,7,9,12,13,15,19,20mm M3~M27 3.90
UPT-05230 TPM-320x7PCS/SET 4,5,6,7,9,12,13mm M3~M16 1.50
UPT-05240 TPM-420x7PCS/SET 4,5,6,7,9,12,13mm M3~M16 1.70
UPT-05250 TPM-432x10PCS/SET 4,5,6,7,9,12,13,15,19,20mm M3~M27 4.10
 
Mersin Temizlik Sirketleri