Home

Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 56

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198
HSK/EOC COLLET CHUCK Print E-mail

MODEL:UPT - 31000

n165-1.jpg (27207 bytes)

n165-2.jpg (13149 bytes)
1. Steel : SNCM - 21
2. HRC 58o
3. Each collet chuck has a nut attached but not include spanner and collet.
4. Type EOC25 choose using model UPT-83868 SYOZ collet mostly.
5. Type EOC25 can use DIN 6388 type:B (UPT-03530)
6. Type EOC32 choose using DIN 6388 type:B collet mostly.
7. Checked by balancing machine.
8. According to ISO 1940-1 standard.
9. The balancing under G2.5.
10. All can be used if R.P.M Within 10,000~20,000.
d1
TEST BAR DIAMETER
MIN. MAX.
L
ROUND
CONCENTRICITY
3 6 16 0.015
6 10 25
10 18 40 0.02
18 24 50
24 32 60

n165-3.jpg (8140 bytes)

1. Standard testing table is in accordance with the cutting length and precision requirements of various sizes of END MILLS.
2. Every Collet shipped out from the factory has passed the test.
 
Mersin Temizlik Sirketleri