Home Contact Customer Service

Login Form




Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 56

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198
CAT / OLP COLLET CHUCK Print E-mail

MODEL:UPT - 23200

 


SLITTING
This type of end mill shank and collet have oil and chips,It's slotted into six order to prevent silpping and to chuck precisely.
NEEDLE BEARING
It adopts two-line system in order to minimize rolling friction and slipping during slide on taper surface.

Benefit:
#1 Never over tighten and damage chuck.
#2 Sealed form dirt and debris to eliminate damage to chuck.
4adjustable coolant ports for directing coolant.
W/O coolant hole nut(UPT-19490) is for coolant through the cutting tool.
Straight shank collant collet see.UPT-19460
MLD coolant Nut see.
UPT-19480
MLD SET SCREW see.
UPT-15945
The pre-balance can reach G6.3 8,000 rpm, without the inspection report.
The balancing grade and revolution can be done according to customer request but the additional charge is needed.

 
Mersin Temizlik Sirketleri