Home

Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 56

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198

Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in /home/sonyhirt/public_html/upt.co.in/libraries/joomla/utilities/date.php on line 198
CAT/EOC COLLET CHUCK Print E-mail

MODEL:UPT - 22000
26-11.jpg (16563 bytes)
PRESET SCREW FOR
6388 and 6499

26-21.jpg (36581 bytes)

106-32.jpg (8183 bytes)
Each collet chuck has a nut attached but not include sapper and collet.
Type EOC25 choice use model UPT-83868 SYOZ collet mostly.
Type EOC25 can use 6388 type : A (UPT-83520) . Type : B (UPT-83530) , type : CL (UPT-83540) collet.
Type EOC32 choice use 6388 type : B collet mostly.
Type EOC32 choice use 6388 type : A or type CL collet .
The Draw Bar's thread (d1) can make pull studs get into with accurately and easily , include 45°, 60° and 90°
BT/EOC collet chuck suitable for heavy duty cutting.
The pre-balance can reach G6.3 10,000 rpm, without the inspection report.
The balancing grade and revolution can be done according to customer request but the additional charge is needed.
 
Mersin Temizlik Sirketleri